Penguin Garage GR Corolla Wheel Spacers

Penguin Garage GR Corolla wheel spacers. 

The spacers are 5x114.3, the hub bore matches Toyota GR Corolla models at 60.1mm and the wheel bore is 73mm or 75mm. The 73mm wheel bore matches many popular aftermarket wheels, the 75 matches the NT03RR, PF06. These were specifically made to help the GR Corolla to fine tune fitment utilizing off the shelf wheel options.

Sold in pairs.

5mm 60.1-73 - Used in the rear to replace the OE 10mm Rear Spacer, allows stock rear GR Corolla studs to be have proper engagement. Works well with a 22mm offset wheel to make effective rear offset 17mm instead of 12mm like OE.

3mm 60.1-73 - Used in the rear to replace the OE 10mm Rear Spacer, allows stock rear GR Corolla studs to be have proper engagement. Works well with a 22mm offset wheel to make effective rear offset 19mm instead of 12mm like OE.

8mm 60.1-73 - Used up front or rear (with oem spacer) on the GR Corolla with extended wheel studs to allow common +35mm and +38mm wheels to have a more aggressive fitment. Also would work in the rear to gain a turn on the oem rear wheel studs when replacing the rear 10mm spacer.

18mm 60.1-73 - Used in the rear (without the oem spacer) on the GR Corolla with extended wheel studs to allow common +35mm and +38mm wheels to have a more aggressive fitment.

**If no stock is listed they available for custom order, custom orders take 3-4 weeks for delivery. We will email anyone who purchases out of stock spacers to confirm time frame is acceptable**

Long Wheel Stud Options for GR Corolla are available.

ARP - here

Ichiba - here

H&R 35mm - here

H&R 40mm - here

H&R 50mm - here